Control Main Switch Hour Meter Display
Fig. 4
Function
Main Switch Switching-on/-off power
Hour Meter Trip counter, reading the number of operating hours
Display Icons and meaning of the icons:
Icon
ON/OFF Power is on
full because water tank is full.
cooling circuit.
has occurred.
Product- and functional description
Illustration, This illustrates the operator control:
Display/Operator
Part
The following describes the function of the different parts of the operator control:
Part Function
Illuminates when ….
Water tank The units are out of operation
Too high The dehumidifiers are automa-
pressure/tempe- tically put out of operation due
rature in the to a temperature over 60°C/
140°F to protect the compres-
sor.
The dehumidifiers will automati-
cally operate again after 30 min.
The red lamp illustrates during
the 30 min. to indicate an error
4
To Next Page
Loading...