Wilo Drain MTC 40 User Manual

de Einbau- und Betriebsanleitung
en Installation and operating instructions
fr Notice de montage et de mise en service
es Instrucciones de instalación y funcionamiento
it Istruzioni di montaggio, uso e manutenzione
no Monterings- og driftsveiledning
sv Monterings- och skötselanvisning
fi Asennus- ja käyttöohje
el Οδηγίες εγκατάστασης και λειτουργίας
tr Montaj ve kullanma kılavuzu
pl Instrukcja montażu i obsługi
cs Návod k montái a obsluze
ru Инструкция по монтажу и эксплуатации
ro Instrucţiuni de montaj şi exploatare
Wilo-Drain MTC 40
6047007 Ed.02/2015-03 WH

Wilo Drain MTC 40 Specifications

General

Brand	Wilo
Model	Drain MTC 40
Category	Water Pump
Language	English

Summary

General Information

Safety

Provides essential safety information and warnings.

Safety Instruction Details

Safety Instruction Symbols and Signal Words

Explains the meaning of safety symbols and signal words used in the manual.

Personnel Qualifications

Consequences of Non-Compliance

Details risks of injury and damage from disregarding safety instructions.

Operator Safety Instructions

Provides safety guidelines for operating the pump and preventing hazards.

Installation Safety

Safety precautions for inspection and installation personnel.

Transport and Storage

Safe Handling and Storage

General Safety Warnings and Intended Use

Pump Description

Installation and Electrical Connection

Installation Procedure

Step-by-step guide for installing the pump, including site preparation and mounting.

Stationary Wet Well Installation

Electrical Connection

Guidelines and safety precautions for connecting the pump electrically.

Electrical Connection Details

Electrical Connection Preparation

Ensures correct current type, voltage, and protective measures for electrical connection.

Single-Phase Motor Electrical Connection

Three-Phase Motor Electrical Connection

Commissioning

Checking Direction of Rotation

Maintenance

Checking the Oil Chamber

Oil Change Procedure

Macerator System Check

Troubleshooting and Faults

Pump Will Not Start

Diagnoses causes like no voltage, blocked rotor, or defective components.

Safety Switches and Power Issues

Addresses safety switch trips and pump power loss due to various causes.

Pump Power Loss Causes

Identifies reasons for pump power loss such as air suction or blocked pipes.