To Next PageTo Next Page
Need help?Do you have a question about the Wilo WJ Series and is the answer not in the manual?
General| Insulation Class | F |
|---|---|
| Material - Shaft | Stainless steel |
| Pumped liquid | Water, sewage, wastewater |
| Voltage | 230 V / 400 V |
| Frequency | 50 Hz |
| Material | Cast iron, stainless steel |
| Connection voltage | 230 V / 400 V |
| Material - Pump housing | Cast iron |
| Material - Impeller | Cast iron, stainless steel |
Details the pump's suitability for watering, draining, and dewatering applications in home, hobby, and garden.
Lists key technical specifications including temperature limits, flow rates, pressure, and electrical data.
Guidelines for proper pump placement, ensuring compliance with regulations and protection from environmental factors.
Instructions for safe and compliant electrical hookup, including safety devices and specific wiring for single/three-phase motors.
Troubleshooting steps for when the pump fails to start, covering power issues, blockages, and motor faults.
Diagnosing and resolving motor overheating issues, including voltage, ambient temperature, and thermal relay checks.
Addresses issues with pump performance, focusing on blockages, air in pipes, and incorrect rotation or foundation.
Guidance on identifying and fixing pump vibration causes, such as foreign matter, loose parts, or bad electrical connections.
