Need help?Do you have a question about the WILSON AUDIO Sasha DAW and is the answer not in the manual?
General| Nominal Impedance | 4 ohms |
|---|---|
| Type | Floorstanding |
| Frequency Response | 20 Hz – 30 kHz, ±3 dB |
| Sensitivity | 91 dB @ 1 watt (2.83V at 1 meter) |
| Drivers | 1x 1" Dome Tweeter, 1x 7" Midrange, 2x 8" Woofers |
Review contents of Sasha DAW tool and spike kit before setup.
Guide to Wilson Audio Setup Procedure (WASP) for optimal speaker positioning.
Method to locate the optimal listening area in your room.
Key considerations for speaker placement and orientation.
Instructions for unpacking speaker modules and checking crate contents.
Guidance on assembling the upper module and mounting it to the woofer module.
Steps for alignment procedures and making umbilical connections.
Procedures for attaching and leveling the speaker using spikes.
Instructions for safely removing the protective film from the speaker finish.
Information on midrange, tweeter, and woofer damping resistors.
Detailed specifications of the Sasha DAW speaker system.
Visual representation of the speaker's physical dimensions.
Tables for determining spike length and alignment block steps for time alignment.
Comprehensive information on the limited warranty, conditions, and remedies.
Details on warranty for original purchaser, demo equipment, and miscellaneous clauses.
To Next Page
