EasyManua.ls Logo

WILSON AUDIO Sasha Series-2 User Manual

WILSON AUDIO Sasha Series-2
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the WILSON AUDIO Sasha Series-2 and is the answer not in the manual?

WILSON AUDIO Sasha Series-2 Specifications

General IconGeneral
TypeFloorstanding
Nominal Impedance4 Ohms
Sensitivity91 dB @ 1W @ 1m
Minimum Amplifier Power50W
Tweeter1-inch
Midrange7-inch
Woofers8-inch
Minimum Impedance2.5 Ohms @ 3.4 kHz

Summary

SECTION 1-IN YOUR ROOM

Section 1.2—Wilson Audio Setup Procedure (WASP)

Details the 'Zone of Neutrality' and provides a method to locate it for optimal sound.

SECTION 2-UNCRATING SASHA

SECTION 3-INITIAL SETUP

Section 3.1—Initial Assembly

Guides on preparing components and assembling the speaker modules, including spike installation.

Section 3.2-Mounting the Upper Module

Details how to correctly mount the upper module onto the woofer module and connect umbilicals.

SECTION 4-FINISHING UP

Section 4.1 - Spiking the Sasha Series-2

Explains the assembly and installation of spikes for speaker placement and acoustical isolation.

Section 4.2-Leveling the Sasha Series-2

Provides instructions on how to level the speakers using the spikes for optimal performance.

SECTION 6-TROUBLESHOOTING

Section 6.1—Troubleshooting

Provides solutions for common operational problems like no sound, off-center imaging, or lack of bass.

SECTION 8-PROPAGATION DELAY TABLES

Related product manuals