Need help?Do you have a question about the WILSON AUDIO Alexia and is the answer not in the manual?
General| Type | Floorstanding Loudspeaker |
|---|---|
| Nominal Impedance | 4 ohms |
| Weight | 116 kg each |
| Drivers | 1" tweeter, 7" midrange, 8" woofers |
| Sensitivity | 90 dB @ 1 watt (2.83v) @ 1 meter |
Discusses acoustical information crucial for optimal speaker setup and performance.
Details the method for locating the 'Zone of Neutrality' for speaker placement.
Explains acoustic phenomena like slap echo, standing waves, and comb filtering.
Covers structural and volume resonances affecting sound quality in listening rooms.
Discusses room shapes and their impact on speaker placement and acoustics.
Provides instructions for initial checks and unpacking woofer and upper modules.
Lists all included items and accessories found within the shipping crates.
Details preparation steps and how to assemble the upper array.
Guides on adjusting speaker timing for optimal soundstage and imaging.
Step-by-step instructions for attaching the upper array to the woofer module.
Explains the correct procedure for connecting umbilicals between speaker modules.
Instructions for attaching, adjusting, and installing the speaker spikes.
Guidance on using spikes to ensure the speakers are perfectly level.
Procedures for safely removing protective film from the speaker finish.
Details the role and importance of internal resistors in the speaker system.
Provides instructions for dusting and cleaning the delicate paint finish.
Explains the recommended method for cleaning the speaker grilles.
Outlines the recommended break-in procedure for optimal performance.
Offers solutions for common problems like no sound, off-center imaging, or lack of bass.
Provides detailed physical measurements, weight, and technical specifications.
Charts for setting speaker propagation delay based on listening distance and ear height.
Details the limited warranty period, requirements, conditions, and limitations.
To Next Page
