Wilson Benesch Circle 25 - Hardware Components; Turntable Hardware Pack; Tonearm Hardware Pack

Turntable Hardware Pack
Comprising: 1 x Turntable Drive Belt
1 x 1.5mm Allen Wrench
1 x 2.0mm Allen Wrench
Tonearm Hardware Pack
Comprising: 1 x Counter-Balance Unit*
  1xAn-SkateWeight*
1 x 1.3mm Allen Wrench
1 x 2.0mm Allen Wrench
2 x M3 Cartridge Washers
  2xM3CartridgeScrews
* The Nanotube One’s counter-balance and
an-skateweightcomepre-assembled.Allen
wrenches and cartridge screws are supplied as
detailed above.