Wilson Benesch Square One - Page 8

8
Square Two
Technical specifications
Square Two
Description 2 way, true linear phase, boundary located, floor standing
Drive units 1 x 170mm (7 in) Wilson Benesch Tactic MID bass units
1 x 25mm (1 in) Soft dome, hand painted silk, ultra linear Wilson
Benesch specification tweeter
Low frequency
loading
Assisted Bass Radiator and precision vented foot port
Frequency range -6dB at 50Hz and 30kHz
-3dB at 55Hz and 25kHz
Frequency response
40Hz to 24kHz +- 2dB on axis
Sensitivity 87dB spl at 1metre on axis. 2.83V input
Impedance 6 Ohms nominal, 4 ohms minimum
Crossover Second order tweeter Selected polypropylene capacitors and air cored
inductors are used throughout
Crossover
frequencies
Tweeter 5kHz
Internal wiring Multi stranded, silver plated copper, PTFE jacketed cable harnesses
Soldered connections throughout. Shortpath P.C.B. design. Links
supplied for single or bi-wire applications
Input connections Bi-wireable, in-house machined rhodium plated alloy terminals
Power handling 200W peak unclipped programme
Maximum spl 108dB at 1 metre
Dimensions Height 975mm
Width 200mm
Depth 255mm
Internal volume 34 litres
Weight 24kg
Finishes available
High Build Piano Black Gloss, Burr Walnut Gloss, Maple Satin, Stained
Cherry Gloss, White Gloss