EasyManuals Logo

Wilson Electronics 2B1401 User Manual

Wilson Electronics 2B1401
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
4
The outside antenna must be installed
vertically. Signal performance will be
degraded if the antenna is not vertical.
The antenna cable may be run through
the door to the ampli er.
The antenna cable is small enough
to easily tuck under the door seal or
plastic molding.
For a more professional-looking
installation, the antenna cable may
be run under the door seal. Carefully
pull down the door seal. Run the
cable through the seal and push the
seal back into place. This prevents
constant wear and tear on the cable as
the door opens and closes.
Optional Magnet-
Mount Antenna
Shown
Part #301103
Carefully
Pull Down
Door Seal
Run Cable
Under
Seal
Tuck Cable
Under Seal
Installing a Wilson Outside Antenna
To receive the best cell signal, select a location in the center of the vehicle’s roof
at least 12 inches away from any other antennas and free of obstructions.
Follow the speci c antenna installation instructions included with the outside antenna
(sold separately).
In-Vehicle

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wilson Electronics 2B1401 and is the answer not in the manual?

Wilson Electronics 2B1401 Specifications

General IconGeneral
BrandWilson Electronics
Model2B1401
CategoryAmplifier
LanguageEnglish

Related product manuals