WilTec CFF-206

8 pages

To Next Page

To Next Page

Loading...

Operation Manual

Automatic Fish Food Dispenser CFF-206

55563

Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

Questions and Answers:

A
Ashley CampbellAug 5, 2025
What to do if the WilTec CFF-206 display does not work?
- N
  natkinsAug 5, 2025
  If the WilTec Dispenser display isn't working, it could be due to a few reasons. First, the internal connection cable might be loose; try unscrewing the screws at the bottom and tightening them again. Alternatively, the battery may be out of power, so place the dispenser in sunlight for solar charging. If that doesn't work, you can charge it with a 12 V adapter, which needs to be purchased separately.
S
Stacey BrownAug 16, 2025
Why does the WilTec CFF-206 Dispenser display work, but feeding does not occur?
- C
  Chad Reeves DDSAug 16, 2025
  If the display of your WilTec Dispenser is working but no feeding occurs, the impeller might be stuck. To solve this, clean the impeller and remove any foreign matter that may be obstructing it.
L
leah28Aug 26, 2025
How to fix the WilTec Dispenser when the impeller rotates, but no feed distribution takes place?
- G
  George DuarteAug 26, 2025
  If the impeller in your WilTec Dispenser is rotating, but no feed is being distributed, clusters of feed might be blocking the inlet. Try using mashed feed to prevent this issue.

WilTec CFF-206 Specifications

General

Brand	WilTec
Model	CFF-206
Category	Dispenser
Language	English

Summary

Introduction and Safety

Intended Use

Specifies the product's intended applications and user restrictions for safe operation.

Product Features

Details key functionalities, power, capacity, and material of the automatic fish food dispenser.

Important Operational Notes

Highlights critical operational safety points, installation, and user interaction warnings.

Installation

Mounting Options

Describes two methods for securing the device: using ground pegs or screws.

Control Panel

Control Panel Layout

Identifies and labels all buttons and indicators on the device's control panel.

Button Functions

Explains the specific actions and purposes of each button on the control panel.

Settings Configuration

Setting Current Time

Guide on adjusting the device's current time using the SET, UP, and DOWN buttons.

Setting Feeding Distance

Instructions for selecting the food distribution range (S, M, L) via the control panel.

Setting Feeding Frequency and Time

Details on configuring daily feeding sessions frequency and specific feeding times.

Setting Feeding Duration

Explains how to set the duration of each food distribution, from 0 to 20 seconds.

Technical Specifications and Troubleshooting

Device Specifications

Lists key technical data including model, capacity, power, and dimensions.

Common Issues and Solutions

Provides guidance on resolving display, feeding, and distribution problems.

Parts List and Diagram

Exploded View

Visual representation of the device showing all components in an exploded format.

Component Descriptions

Detailed list of all parts with their corresponding numbers from the diagram.