© by WilTec Wildanger Technik GmbH Item 55563 Page 5
http://www.WilTec.de
http://www.aoyue.eu 07 2021-1
http://www.teichtip.de
1. Current time
Briefly pressing the button allows for the adjustment of the current time.
2. Feeding time
Sets the starting time for feeding sessions.
3. Feeding level
Sets the frequency of daily feeding sessions with a maximum of 6 daily feeding sessions.
4. Charge indicator
Flickers while charging and remains visible once the battery has been charged completely.
5. Battery level indicator
Shows the current charge level of the battery.
6. Feeding duration
Sets the duration of each respective food distribution up to a max. of 20 s.
7. Feeding distance
Regulates the level of force with which the food is distributed.
• S: Small feeding radius
Uses about 60 % motor capacity and has a distribution range of about 1 m.
• M: Medium feeding radius
Uses about 80 % motor capacity and has a distribution range of about 2 m.
• L: Large feeding radius
Uses about 100 % motor capacity and has a distribution range of about 3 m.
8. Manual feeding
Pressing and holding this button for 3 s will immediately start the feeding process.
9. Down
Used to decrease levels and time values.
10. Up
Used to increase levels and time values.
11. Settings
Briefly pressing this button will cause the device to switch between modes.
To Next Page
Loading...
General