To Next PageTo Next Page
Need help?Do you have a question about the WilTec HW Series and is the answer not in the manual?
Unclipping buckles to separate filter head from base for access.
Attaching taps and hoses to the filter head using handles and screw caps.
Connecting the input downpipes and output spraybars according to the diagram.
Using the primer button to fill the filter and pipework with water.
Procedure for safely opening the filter head to access the UV light tube.
Steps to detach and remove the faulty UV light tube from the unit.
Addresses issues like no response, motor failure, and inhibited water flow.
Solutions for abnormal sounds during filter start-up.
Fixing noise, external air ingress, and de-aerating the filter system.
Diagnosing and resolving leaks, particularly concerning O-ring seals.
Diagram and list identifying all parts of the aquarium filter system.
Visuals and names of different filter media materials available.
Guidance on arranging filter media layers for optimal filtration.
Explanation of mechanical, biological, and chemical filtering stages.
General
