WilTec Sunsun CPF-20000

Operation Manual
Pressure Filter CPF Series
50105, 50123, 50977–50980, 50121, 51042–51044
Illustrations similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

WilTec Sunsun CPF-20000 Specifications

General

Model	Sunsun CPF-20000
Category	Water Filtration Systems
Suitable for ponds up to max.	20000 Liters
Suitable for ponds with fish up to max.	10000 Liters
Max Head	2.5 m
Frequency	50 Hz
Hose connections	25 / 32 mm
Voltage	220-240 V

Summary

Introduction

BEWARE

Safety warnings regarding device usage, supervision, and specific water body restrictions.

ATTENTION

Operational safety precautions, device handling, electrical safety, and installation guidelines.

Stability

Electrical Connection

Application Area and Functioning

Commissioning

Safety Guidelines

WilTec Pond Filter Functions

Commissioning Steps

Hose Tail Connections

Install Stepped Hose Tails

Steps for attaching hose tails to water inlet and outlet connections.

Water Inlet Connection

Water Outlet Connection

Cleaning Outlet Connection

Operating Principle

Filter Cleaning and Maintenance

Cleaning Filter Sponge

Pump Connection

UV Unit Information

Maintenance and Adjustment Options

Filter Operation Setting

Cleaning Operation Setting