Wimberley, Inc.
Phone: 1
-434-529-8385
1750 Broadway St
Toll Free: 1
-888-665-2746 (USA & Canada)
Charlottesville, VA
22902 USA
www.tripodhead.com
info@tripodhead.com
5 Year Warranty
– for details see www.tripodhead.com/warranty.cfm
Package Contents:
M-3 Module:
Tilt Arm (Qty 1)
M-2 Module:
Upright (Qty 1)
M-1 Module:
Quick-release Arm (Qty 1)
Instructions on reverse >>
Wimberley, Inc. ©2017, All Rights Reserved Rev. 170622
Dimensions (overall L x W x H):
5.7” x 1.0” x 9.2” in Weight: 9.4 oz (267g)
Telephoto Flash Bracket
F-1 Flash Bracket
F-1
Sidekick Flash Bracket (F-6):
The F-1 can be converted into a compact bracket that works with the Wimberley Sidekick, Sidemount
Wimberley Head and other side-mount gimbal tripod heads. This is accomplished by removing the
upright and attaching the Tilt Arm (M-3) directly to the Quick-release Arm (M-1)
M-6
M-6 Extension Post Module:
This post extends the height of your flash by up to 5” which helps reduce red eye or “steel
eye” in your people or animal subjects. If you desire more extension, you can stack up to
three Extension Posts to get the height you need.
Thank you for your interest in Wimberley products. If you have any questions or comments please feel free to contact us.
Macro Arm (M-4):
Use the M-4 module for additional versatility in flash positioning. This is especially
useful in tricky situations such as shooting from a blind.
200mm Macro
Mounts on camera body
plate for small lenses
The Macro Arm (M-4) can also be used to connect directly to the Quick-Release Arm (M-1). This is commonly used in macro appli-
cations or with small cameras and lenses where the upright module is not necessary.
Other Uses and Add-ons:
Sidekick Flash Bracket (F-6)
M-1 Quick-release Arm
F-3 Tilt Arm
Made in USA
To Next Page
Need help?
General