Wimberley F-2 User Manual

Unattached use:
Use the bracket unattached to the
lens as a mini tripod for your flash,
or hang it from a branch or rail
Wimberley, Inc.
Phone: 1
-434-529-8385
1750 Broadway St
Toll Free: 1
-888-665-2746 (USA & Canada)
Charlottesville, VA 22902 USA
www.tripodhead.com
info@tripodhead.com
5 Year Warranty
– for details see www.tripodhead.com/warranty.cfm
Package Contents: M-1 Module:
Quick-release (Qty 1)
M-4 Module:
Macro Arm (Qty 1)
Instructions on reverse >>
Wimberley, Inc. ©2017, All Rights Reserved Rev. 170622
12” Reflector
Plamp II
24” Reflector
Extension
Tube
Steady wind-blown
plants for ambient light
photography
Move your subject
into the desired
position for lighting
Hold reflectors, diffusers, small
lighting units or shades to prevent
lens flares
Change the orientation of your subject
to make an impossible camera angle
into an easy one
Ground
Plamp
Move distracting background
or foreground elements out
of the way
Move your subject to isolate
it from distracting background
or foreground elements
The Plamp Family of Macro Supports:
Create a mobile macro studio with our family of
articulating clamping arms, stakes and
accessory components. Confidently hold
subjects, reflectors background elements
and other Items needed to compose
your photo.
Thank you for your interest in Wimberley products. If you have any questions or comments please feel free to contact us.
Dimensions (overall L x W x H):
5.5” x 4.25” x 2.25” in Weight: 14.7 oz (417g)
Macro Flash Bracket
F-2
Dual-arm Macro set-up:
Two F-2 brackets can be attached to a lens
plate or M-8 Perpendicular Plate.
F-2 Flash Bracket
Other Uses and Add-ons:
Made in USA

Wimberley F-2 Specifications

General

Brand	Wimberley
Model	F-2
Category	TV Mount
Language	English

Summary

Other Uses and Add-ons

Unattached Bracket Use

Use the bracket unattached as a mini tripod for flash or hang from a branch or rail.

Dual-arm Macro Setup

Attach two F-2 brackets to a lens plate or M-8 Perpendicular Plate for a dual-arm setup.

The Plamp Family of Macro Supports

Subject Positioning and Angles

Change subject orientation for impossible camera angles and move subjects for optimal lighting.

Reflector and Lighting Control

Hold reflectors, diffusers, or lighting units to manage light and prevent lens flares.

Plant Stabilization for Photography

Steady wind-blown plants for ambient light photography.

Background Management

Move distracting foreground or background elements to isolate the subject.

Attaching the Bracket to a Lens

M-1 Quick-release Arm Module

Shown with QR clamp up and QR clamp facing down, used for attaching the bracket.

F-2 Mounted on Lens Plate

Illustrates the F-2 bracket attached to a lens plate for camera mounting.

F-2 Mounted on Universal Camera Body

Shows the F-2 bracket attached to a camera body via a universal plate.

M-1 Quick Release for Dovetail Plates

Use AP-11 to convert older single dovetail plates for flexible bracket attachment.

Flash Positioning and Mounting

Flash Position Adjustment

Loosen wing knobs on Macro Arm clamshells for wide array of flash positions.

Attaching Flash Units

Use 1/4"-20 thumbscrew to attach flash units via hot shoe cables or cold shoe adapters.

Connecting Flash Bracket Modules

Details on connecting M-1 and M-4 modules using knobs and raised nubs.