Wimius K7 - iOS CABLE CAST

support01@wimius.com
Miracast
%
To connect Android Mobile/Pad Device with Projector Based on
WiFi-Display Technology
= =
Ll =
Projector Mobile
2Access your display settings or screen-mireoring.
3Selectyour Miracastreceiver: K7-81EG-(icast)
Waiting for connection...
2) Select the [ Settings ] menu on your Android device — Select the [ Screen mirroring ]
function - Select your Miracast receiver named [ K7-81E6-(icast) ] -- your Android device
screen will be displayed on the projection screen after 3 seconds.
3) On your Android device, tap [ Settings ] -{ WLAN Display ] -Turn [ Wi-Fi ] ON, Connect
your home WiFi.
Note:
1. Different brands of Android phones have different operations for select Screen Mirroring
Display, please refer to your phone's manual. [ Multiscreen/Wireless displayWLAN
display/Screen mirroring/Wireless projection/Smart view etc. |
2. Not all Android phones support this function. Please make sure it has this function
before use.
iOS CABLE CAST
1. Go to home page — Select the Screen Mirroring - Select the iOS Cable Cast.