Wimius K7 - Page 3

support01@wimius.com
Dear customer,
Thank you for choosing WiMiUS!
Please read this manual thoroughly before using the projector. If you have any issues,
email your amazon order number and the problem to support01@wimius.com. We will
provide a fast solution within 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound,
bluetooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We
promise all the projectors have been 100% carefully checked and packaged before
shipping.
Any questions, reach us via below methods:
Email: support01@wimius.com
Website: www.wimius.com
WiMiUS Service Team
1. Do not place projector in too warm or too cold room, because the high temperature or
low temperature will shorten lifespan of the device. The working environment would be 5
C~35C better.
2. If there are black spots on the projection screen, please don't worry, please contact
us.com via email, we can send you a video about how to remove the
3. The ventilation is equipped for the projector to work stably. Don't cover the vent with
cloth, blanket or other things. Don't insert anything into the slit of the projector, o it may
produce a short circuit or an electric shock to your device and cause damage.
4. The projector shall be strictly protected from strong impact, extrusion and vibration. Do
not try to move and on strong impact, extrusion and vibration. Do not try to move and the
internal circuit faults.
5. Lens, as the core component of the projector, is directly related to the picture definition
and effect. The excessive dust thereon will affect image quality. The dirty lens shall be
wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be
used.