Wimius K8 - Connect to the DVD Player

Computer only: is the default option – only displays on the main monitor.
Duplicate: makes all of the monitors display the same thing duplicating the
desktop on each monitor.
Extend: makes all of your monitors act like one big monitor extending the
desktop across all of them.
Projector only: Displays only on the secondary monitor like a projector.
You can change the screen resolution on the Projector Only Mode
Step: Start > Control Panel > Appearance and Personalization > Adjust Screen
Resolution
Manufacture
Acer
Dell
Epson
Fujitsu
IBM
Hewlett-packard
Lenovo
Keys
Fn+F5
Fn+F8
Fn+F8
Fn+F10
Fn+F7
Fn+F4
Fn+F10
Manufacture
NEC
Panasonic
Sharp
Sony
Tpshiba
Zotac
Keys
Fn+F3
Fn+F3
Fn+F5
Fn+F7
Fn+F5
Fn+F3/F5
3.Connect to the DVD Player
Use the 3-in -1 AV cable in the package
1) Turn on your DVD player and the projector;
2) Connect the colorful female connectors to your DVD player's RCA cable with
the 3-in-1 AV cable in the package;
3) Connect the black connector to the AV port of the projector, enter the home
page to select [ AV ] as the signal source.
EN
support01@wimius.com