STARTING PROJECTOR
IMAGE ADJUSTMENT
1)Press the power key on the remote or projector, the indicator light will turn
green;
2)Adjust the focus ring on the right side of the projector to get the best image
performance; (If it is still blurry, please try to adjust the projection distance.
3)Use the 4D keystone function of the projector to get a rectangle projection
screen;
4)Connect the external device (Smart phone, iPad, Amazon Fire TV, TV box,
DVD player, Computer, etc.in the corresponding interfaces of the projector,
please be sure to select the corresponding source. If you do not select the
correct source, the projector will not be able to detect the signal;.
5)Select the " " menu,enter the [ Language],then you can set your
preferred language.
When using the projector for the first time, it normally displays an unclear
image. This is due to the lens being out of focus or the incorrect trapezoid
setting.
Please follow the below steps to correct:
Focusing
Keystone Correction
1.Focus Adjustment
EN
support01@wimius.com
To Next Page
Loading...
