Wimius P60 - Safe Shutdown; Warranty; Troubleshooting

3 Support01@wimius.com
Safe Shutdown
1. Press the Obutton on the projector or remote.
2. Unplug the power cord of the projector.
3. Cover the lens and store the projector in a cool and dry place.
Warranty
Thank you so much for your purchase and support! We provide 3 year warranty for P60 projector. The first year for
free replacement, the next two years for free repair. If you have any questions, please feel free to contact us via
support01@wimius.com
Troubleshooting
Problems listed below might occur during the operation of your projector.
Please refer to the possible factors which might cause the issue to do troubleshooting.
1. When turning on the power switch, the indicator light does not work.
a. The power might not be connected well.
b. Check the over-heat protection system.
2. The remote control does not communicate with the projector.
a. The power switch at the back of the projector is turned on or off?
b. The remote control's batteries are depleted?
c. Something obstructing the signal between the remote and IR .