Wimius P64 - Frequently Asked Questions (FAQ); Remote Control and Screen Issues; Audio and Picture Problems

[ supportol@wimius.com
FAQ
1. The remote control does not communicate with the projector.
1) The power switch at the back of the projector is turned on or off?
2) The remote control's batteries are depleted?
3) Something obstructing the signal between the remote and IR
2. No image on the screen.
1) Is the channel set up correct?
2) Is there an input signal ?
3) Is the input cable plugged well ?
4) Under PC mode, is the refresh rate > 75KHz ?
3. Blue screen,no picture,no sound.
Input cables are connected right?
4.Picture right, no sound.
1)Input cables connected right?
2)Volume at min or on Mute.
3)Trun off the AC3/Dolby sound and set it to stereo sound.