Wimius P64 - Usage Tips and Precautions; Environmental and Handling Advice; Lens Cleaning and Maintenance

[ supportol@wimius.com
TIPS:
1.Do not place the projector in too warm or too cold a room, because the high temperature or low temperature will
shorten the lifespan of the device. The working environment would be 5°C~35°C better.
2lf there are black spots on the projection screen, please don't worry, please contact support0l@wimius.com via
email, and we can send you a video about how to remove the dust.
3.The ventilation is equipped for the projector to work stably. Don't cover the vent with cloth, blanket or other things.
Don't insert anything into the slit of the projector, or it may produce a short circuit or an electric shock to your device
and cause damage.
4.The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on
strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
5.lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive
dust thereon will affect image quality. The dirty lens shall be wiped with a soft cotton cloth for the glass lens surface.
Hard cloth or abrasives shall not be used.