WiMo miniVNA PRO2 - LED Indicators; LED Placement and Meaning; Bluetooth Operation; BT Module Activation

Hardware Guide for miniVNA PRO2
+49 7276 / 96680
www.wimo.com info@wimo.com  WiMo 2018
4
LED placement and meaning.
BT operation
The BT module is enabled after resetting the units and the main switch is set to ON position, the blue led 6 will blink slow indicating that the BT is in
searching mode. Run the pairing software from PC side and search for a new device.
Suggested option
Calibration kit, containing SMA open/short/50 Ohm termination.
Part no. 21010.SMA
LED 6
LED 1 / yellow
Indicates battery in charge
LED 2 / green
Indicates scan data
LED 3 / green
Indicates power on
LED 4 / yellow
Indicates flow of data.
LED 5 / yellow
Indicates flow of data.
LED 6 / blue
When flashing slow indicate the BT module is
discoverable, when flashing fast the BT is
connected.
LED 5
LED 4
LED 3
LED 2
LED 1