What to do if my Winco Spectrum EICS-18 Cookers unit is not turning on?
If your Winco Cooker unit isn't turning on, first verify that the power supply cord is correctly plugged into a working outlet. If the issue persists, there may be damage to the plug or cord's external wiring, requiring a power cord replacement by an authorized service provider.
Why is the IGBT sensor overheated in my Winco Spectrum EICS-18?
If the IGBT sensor in your Winco Cookers is overheating, the fans in the main board may be broken, or the air inlets could be blocked, leading to poor heat dissipation. For assistance, an authorized service provider will need to perform the replacement.
Why is the temperature sensor overheated on my Winco Cookers?
If the temperature sensor is overheated on your Winco Cookers, check the fans under the coil. Also, verify the surrounding temperature; if it's above 122°F (50°C), the cooker will stop heating. For assistance, an authorized service provider will need to perform the replacement.
What to do if I get an empty cookware protection error on my Winco Spectrum EICS-18 Cookers?
If you are getting an empty cookware protection error on your Winco Cookers, make sure that the cookware on the induction cooker contains ingredients. Also, ensure that the cookware is compatible with induction cookers and has a flat bottom with a diameter of at least 4-1/2".
What to do if IGBT sensor open circuit in Winco Spectrum EICS-18?
If the IGBT sensor on the heat sink of your Winco Cookers has an open circuit (broken or unplugged), replacement must be done by an authorized service provider.
What to do if temperature sensor open circuit in Winco Spectrum EICS-18 Cookers?
If the temperature sensor on the heating sink of your Winco Cookers has an open circuit (broken or unplugged), or if there's a broken insulated exposed metal wire, or a broken outlet, replacement must be done by an authorized service provider.
What to do if circuit failure in Winco Cookers?
If there is a circuit failure in your Winco Cookers, check the coil for an open circuit. Replacement must be done by an authorized service provider.
General| Brand | Winco |
|---|---|
| Type | Induction Cooker |
| Power | 1800 W |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Number of Burners | 1 |
| Safety Features | Overheat protection |
| Material | Stainless steel |
| Model | EICS-18 |
To Next Page