Wind Chaser WC166 - Storage and Specifications; Storage Instructions; Electrical Ratings and Caution

nozzle, unscrew it from the misting line for further cleaning.
Place nozzles in a container of vinegar or a household lime and scale remover
(such as Lime-Away™) for about 30 minutes. Make sure to stir or shake the
solution every few minutes to help loosen debris. Heavier deposits may require
longer soaking and/or additional scrubbing of the nozzles with a stiff non-metal-
lic brush.
After soaking, shake the nozzles. You should hear a rattling sound. If none is
heard, gently tap the nozzles against a solid surface to loosen any obstruction.
If this doesn’t clear the nozzles, they should be replaced. Check your packaging
for extra nozzles, or call WindChaser Products, Inc. to purchase replacement
nozzles.
IMPORTANT – Never attempt to clear nozzles with pins, nails or other metal
objects as this can damage the misting orifice.
Use only a soft moistened cloth with a soap solution to clean the fan.
Do not immerse the fan in water.
Do not use gasoline thinners or other chemicals to clean fan.
To dismantle for cleaning or long term storage, follow the assembly instructions in
reverse order. The fan blade may be washed in warm water using a little mild
detergent. Alternatively, it may be wiped clean with a soft damp cloth. Be sure it is
completely dry before re-fitting.
The front and rear grills, stand and base can be cleaned with a soft brush or soft
damp cloth.
For storage, clean fan carefully as instructed and store in its original box or cover
with plastic / cloth. Store the fan in a clean, dry place.
ELECTRICAL RATINGS
This product has been rated at 120VAC 60Hz 54W. If you experience a problem,
contact WindChaser customer service.
Do not attempt to open the motor housing of the fan; doing so may cause damage to
the fan or personal injury.
CAUTION
There are no consumer serviceable parts inside this fan. If you experience a
problem, please see warranty for information. Please do not attempt to open the fan;
doing so will void your warranty and could cause damage and personal injury.
STORAGE INSTRUCTIONS
PRTES