Windsor ROMBUS RMBS12

Questions and Answers

H
Haley RossJul 31, 2025
Why Windsor ROMBUS RMBS12 has no power?
- B
  briana46Jul 31, 2025
  If your Windsor Vacuum Cleaner isn't receiving power, there are several potential causes. It could be due to a dead electrical circuit breaker in the fuse box, in which case you should check the building's circuit breaker. Alternatively, there might be a faulty power cord, requiring a replacement. Another possibility is a power switch failure, which would also necessitate replacement. A faulty circuit breaker could also be the cause, and it would need to be replaced. Finally, an internal wiring problem could be the culprit; with the machine unplugged, check for and correct any loose wire connections.
J
Jason ShawAug 7, 2025
How to fix Windsor ROMBUS RMBS12 Vacuum Cleaner brush not turning?
- M
  Michelle WestAug 8, 2025
  If the brush on your Windsor Vacuum Cleaner isn't turning or scrubbing, potential causes include a faulty brush motor (replace the brush motor), worn gears (replace the gears that are not functioning), worn brushes (replace the brushes), or worn brush motor brushes (replace the brushes and check the commutator).
E
ecrossAug 15, 2025
What to do if Windsor Vacuum Cleaner causes electrical shock?
- M
  Megan YoungAug 15, 2025
  If you're experiencing electrical shocks from your Windsor Vacuum Cleaner, it could be due to several reasons. The equipment might not be properly grounded; ensure you follow the grounding instructions. Another cause could be a receptacle that isn't grounded; in this case, have an electrician inspect the building's wiring. Finally, there might be an internal electrical problem; check for any loose wire connections and replace any items that are short circuiting.
M
mcbridedianaAug 23, 2025
Why does my Windsor ROMBUS RMBS12 Vacuum Cleaner circuit breaker keep tripping?
- C
  Christian MartinezAug 23, 2025
  Nuisance tripping of the circuit breaker in your Windsor Vacuum Cleaner may be due to a faulty circuit breaker, which would need to be replaced. Alternatively, a mechanical problem could be the cause. Test the circuit breaker for continuity; a higher amp draw may indicate faulty parts. Find parts not moving freely and repair or replace them.