Windsor SENSOR S12 - General Safety Instructions

3
Upright Vacuum
Call: 1-800-USA-CLEAN (800-872-2532) Click: www.usaclean.com Fax: 1-888-USA-CLEAN (888-872-2532)
Windsor Sensor
Replacing the Bag and Mircrolter
These are general maintenance guidelines.
Please consult your owner’s manual prior to performing any repairs or maintenance on this machine.
**Before you begin: Turn the machine off and unplug it.
1. Lift lever up
to remove front
cover.
2. Squeeze the
clips on the bag
together to release
bag.
3. Slide the bag
out to remove.
4. Reverse process
to install a new
bag.
1. Perform
“Replacing the
Bag” steps 1-3.
2. Push the wire
holder back
to release the
microlter.
3. Slide the
microlter out to
remove.
4. Reverse the
process to install a
new microlter.
Note: Push the
wire holder down
and hold it while
you slide the
microlter in place.