WindStream Technologies KineticTV Box - Page 7

KineticTV RSTV-A4K-16 Quick Reference
Guide V1.1
~
7
~
Step3: Connecting the KineticTV b ox to a power source
Connect the power adapter to the KineticTV box, connect the AC Adapter to a powered wall
outlet. After connecting the KineticTV box will start automatically.
 Side Panel Connection
Tips:
1) Be sure to insert the TF/SD Card in the right direction, see the above illustration.
2) Be sure to insert the USB device in the right direction, see the above illustration.
Note: Before powering on, please switch the signal input of the TV to the correct
source.
USB Device