Wine Enthusiast 264 01 59 03 User Manual

10
Setting the Temperature Control
NOTE: The left side temperature readout indicates set temperature while the right
side temperature readout indicates actual current temperature.
1. Make sure power cord is connected to a properly grounded outlet.
2. Turn power ON.
3. Set the desired temperature by pushing the UP or DOWN button.
4. Temperatures increase or decrease 1°F with each push of the UP or
DOWN button.
5. NOTE: Temperatures may fluctuate depending on whether the interior
light is ON or OFF and depending on the position of the bottles.
Temperature Settings for Serving Wine
Although optimal storage temperature is generally regarded to be 53-57°F,
different varietals of wine require different service temperature settings. The
recommended temperature ranges for serving different varietals of wine are listed
below. Your wine cellar will indicate when you have set the Upper/Lower zones to
the below temperature ranges.
Red Wines: 60-66°F
White Wines 45-52°F
Sparkling Wines 40-45°F
Interior Light
• To complement the look of your wine collection, a soft light has been built into
the wine cellar. Simply push the "Light" button and the light comes on, push again
for off. For maximum energy efficiency, leave light off when not viewing your
collection.
• When door is open the light will go on. Upon closing the door, the light will go
off.

Wine Enthusiast 264 01 59 03 Specifications

General

Brand	Wine Enthusiast
Model	264 01 59 03
Category	Wine Cooler
Language	English