Wine Enthusiast 264 01 59 03 User Manual

9
Operating Your Wine Cellar
Each wine cellar includes an operating panel on the front of the unit. This
operating panel includes several features to operate and control the temperature.
1. Turns the light ON and OFF.
2. Set temperature display, shows the factory preset or use the UP or DOWN controls
to change to your preferred setting.
3. Indicates Celsius or Fahrenheit for the temperature set reading.
4. Displays the actual wine cellar temperature. The temperature will reach its set
temperature after cooling, the display is accurate ±1°F.
5. Temperature UP, the temperature increases 1°F each time the UP button is pressed.
6. Use to toggle the LED display between Celsius or Fahrenheit readings. Also can be
used to turn OFF the wine cellar by depressing for 5 seconds.
7. Indicates the compressor is currently cooling.
8. Indicates Celsius or Fahrenheit for the temperature.
9. Temperature DOWN, the temperature decreases 1°F each time the DOWN button is
pressed.
Before You Start
The wine cellar should be placed in a location where the ambient temperature is between
60-77 degrees Fahrenheit. If the ambient temperature is above or below this range, the
performance of the unit may be affected. For example, placing your unit in extreme cold
or hot conditions may cause interior temperatures to fluctuate.

Wine Enthusiast 264 01 59 03 Specifications

General

Brand	Wine Enthusiast
Model	264 01 59 03
Category	Wine Cooler
Language	English