Beverage Cooler Package Contents
• Instruction manual
• 2 Shelves
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock, or injury when
using your appliance, follow these basic precautions:
Read all instructions before using the beverage cooler.
DANGER: Risk of child becoming trapped in new cellar, old beverage cooler/refrigeration unit, or large boxes.
Junked or abandoned appliances, boxes and other containers are still dangerous, even if they will “just sit in
the garage for a few days”.
Before you throw away your old beverage cooler or refrigeration unit: 1. Take off the door. 2. Leave the
shelves in place so that children cannot climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
Do not store in the vicinity of any other appliance. Do not store near gasoline or any other flammable vapors.
The fumes can create a fire hazard or explosion.
-Save these instructions-
BEFORE USING YOUR beverage cooler
Remove the exterior and interior packaging.
Before connecting the beverage cooler to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
INSTALLATION INSTRUCTIONS
(a) General Installation Instructions
This appliance is designed for free standing installation. Do not build-in or recess into closed cabinetry.
Place your beverage cooler on a flat, solid floor that is strong enough to support it when it is fully loaded. To
level your beverage cooler, adjust the front leveling leg at the bottom of the beverage cooler.
When moving your beverage cooler, please do not incline it more than 45 degrees.
Locate the beverage cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
Extreme cold ambient temperatures may also cause the unit to perform improperly.
Avoid locating the unit in damp areas.
Plug the beverage cooler into a dedicated (for this appliance only), properly installed and grounded wall
outlet. Do not under any circumstances cut or remove the third (grounding) prong from the power cord. Any
questions concerning power and/or electrical grounding should be directed to a certified electrician or
authorized product service center.
3
To Next Page
Loading...
Need help?
General
