What to do if my Wineemotion 5 Cinque is not turning on?
If your Wineemotion Beverage Dispenser isn't turning on, there are a couple of things to check: * First, make sure the power button is switched on. If it's off, switch it on. * Second, verify that the power cord is securely connected. If it's not, connect it properly.
Why is the wine dispensing not continuous in my Wineemotion 5 Cinque Beverage Dispenser?
If the wine dispensing from your Wineemotion Beverage Dispenser is not continuous, here are some possible reasons: 1. The gas cylinder might be empty. If so, replace the gas cylinder. 2. The pressure could be low. Check the pressure. 3. The suction tube may not be fitted correctly. Ensure the suction tube is correctly inserted. 4. The suction tube filter might be blocked. Remove the bottle and clean the filter.
What to do if Nitrogen is leaking from my Wineemotion 5 Cinque Beverage Dispenser?
If nitrogen is leaking from your Wineemotion Beverage Dispenser, consider these potential causes: * The gas cylinder connections may be loose. Tighten the connections. * The bottle might be too short. Insert the shim between the piston and metallic bottle pusher cup. * The bottle may not be correctly inserted. Check that the bottle compresses correctly against the seal pad of the dispenser and inspect the dispenser for leaks.
Why is wine dripping from the steel tube of my Wineemotion Beverage Dispenser?
Wine dripping from the steel tube of your Wineemotion Beverage Dispenser is likely due to wine sediments in the dispenser. Perform cleaning maintenance with citric acid solution, as described in the manual.
How to fix Wineemotion 5 Cinque Beverage Dispenser if it cannot reach the correct temperature?
If your Wineemotion Beverage Dispenser cannot reach the correct temperature: * Ensure the machine has been installed correctly, with the required air circulation gaps, as insufficient air circulation may be the cause. * If the fans are switched off or the refrigeration system is not working, call technical support.
Details on how the dispenser is designed to pour and enjoy high-quality wines.
Provides essential safety guidelines for operating the wine dispenser.
Instructions for installing the dispenser in recessed configurations.
Information on connecting the dispenser to the power supply and its requirements.
Details on the pneumatic system, including air and gas inlets.
Instructions for supplying and connecting nitrogen or argon gas.
Procedures for installing and replacing argon gas cylinders.
Steps for correctly inserting a wine bottle into the dispenser.
Details on operating the dispenser in manual mode.
Explains how to interpret error codes displayed by the system.
Procedure for calibrating the dispensing from the taps for accurate volume.
Function to determine dispenser display and bottle compartment lighting parameters.
Defines parameters for wine, including glass volume and price.
Common faults, their causes, and solutions for the dispenser.
General| Brand | Wineemotion |
|---|---|
| Model | 5 Cinque |
| Category | Beverage Dispenser |
| Language | English |
To Next Page
