To Next PageTo Next Page
Need help?Do you have a question about the Winegard TRAV’LER SHAW DIRECT SK-7003 and is the answer not in the manual?
General| Compatibility | SHAW DIRECT |
|---|---|
| Model Number | SK-7003 |
| Mounting Type | Roof Mount |
| Control | Automatic |
| Power Supply | 12V DC |
| Number of Satellites | 3 |
| Skew | Automatic |
| Automatic Deployment | Yes |
| Type | Satellite Dish Antenna |
| Frequency Range | Ku-band |
| Azimuth | 360° |
Ensures adequate space and correct orientation for the TRAV'LER antenna's operation.
Verify mount orientation and mark screw hole locations on the RV roof for secure attachment.
Apply sealant around the base and screw the mount securely to the RV roof.
Connect the GPS antenna to the TRAV'LER Mount, ensuring proper placement and cable handling.
Drill a hole for wires, install the cable entry plate, and seal all openings to prevent leaks.
Connect the coaxial feed from the TRAV'LER to the Shaw Direct receiver's input.
Verify the receiver displays a green satellite icon for a successful signal lock.
Covers defects in materials and workmanship for two years parts, one year labor.
Procedure for obtaining RMA, proof of purchase, and shipping requirements for returns.
