What to do if Winegard WIFIRANGER Converge Teton HD is not showing up in available networks?
If you don't see your Winegard Wireless Router in the list of available networks, make sure the router is powered on. If it is already on, wait 3-5 minutes and try connecting again. If the device is powered off (no lights), test the power supply for 12V using a voltage meter. If the issue persists, perform a factory reset.
How to factory reset Winegard WIFIRANGER Converge Teton HD Wireless Router?
To perform a factory reset on your Winegard Wireless Router: 1. Unplug or switch off the power (wait 5 seconds). 2. Power on (wait 2 minutes 30 seconds), then power off (wait 5 seconds). 3. Power on (wait 3 minutes 30 seconds), then power off (wait 5 seconds). 4. Power on (wait 3 minutes 30 seconds), then power off (wait 5 seconds). 5. Finally, power on and wait 3 minutes. After this, connect to the WiFiRanger following the instructions in the Quick Start Guide.
General| Brand | Winegard |
|---|---|
| Model | WIFIRANGER Converge Teton HD |
| Category | Wireless Router |
| Language | English |
Instructions for powering on the WiFiRanger device.
Steps to connect your device to the WiFiRanger network.
Guide to entering the default WiFi password.
How to access the WiFiRanger Control Panel.
Connecting to available WiFi or cellular networks.
Instructions to turn on the TV wall plate.
Process for scanning and finding available TV channels.
Steps to tune into AM/FM radio stations.
Contact details for cellular carriers for LTE activation.
Steps to access cellular settings within the Control Panel.
How to find SIM and IMEI numbers for activation.
Steps to refresh the SIM number after changing the SIM card.
Guide for manually configuring APN settings if needed.
Steps to resolve internet connection issues.
Steps if the WiFiRanger network is not visible.
Instructions for performing a factory reset.
How to reset the password by performing a factory reset.
Steps to resolve issues accessing the Control Panel.
How to connect to public WiFi networks requiring login.
Locating IMEI and SIM numbers for modem use.
Steps to resolve product registration issues.
Details of the 1-year warranty for product functionality.
Details of the 1-year warranty for hardware.
Procedure for obtaining a Return Material Authorization.
Information on repair and replacement for out-of-warranty products.
Statement regarding compliance with FCC rules.
Cautionary notes for operating the equipment.
Details on FCC radiation exposure limits.
To Next Page
