EasyManua.ls Logo

Winix 70BT - Gravity Drain

Winix 70BT
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
English
50BT, 70BT
②
Remove the bucket from the unit. Remove the DRAIN CONNECTOR from
the bucket.
③
Install the DRAIN CONNECTOR to the
dehumidifier by inserting fully into
the gravity drain in the rear of the unit,
and turning clockwise.
④
Screw a standard drain hose to
the drain connector by turning
it clockwise.
OPERATION
Defrost Operation
x
The dehumidier has a built-in defrost control that senses frost buildup on
the evaporator coils.
x
During defrosting, the compressor will automatically turn o; the fan will
continue running to defrost the coils.
Automatic Shut off
x
When the bucket is full, or when the bucket is not in the proper position,
the Bucket Full light will turn on and the unit will automatically shut o.
x
The unit will automatically shut o when the bucket is not seated properly
in the unit. The light will stay on until it is adjusted properly.
x
The unit will turn o once the set humidity level is reached, plus or minus
5% Relative Humidity (RH).

Related product manuals