Winix AW600 - Page 19

During Humidification process
During PlasmaWave® operation only
18
Adjust Timer
PlasmaWave
®
Technology
Lock Button
Push TIMER button to set a timer.
Push PLASMAWAVE/LOCK button for
more than 3 seconds to activate Lock.
During Humidication process
The TIMER button will cycle through the
unit timer settings:
2 hours -> 4 hours -> 8 hours
Push PLASMAWAVE/LOCK button to
operate PlasmaWave
®
.
During PlasmaWave
®
operation only
Use this button to turn PlasmaWave
®
function ON/OFF
Push PLASMAWAVE/LOCK button to
operate PlasmaWave
®
while the unit OFF.
Use this button to turn PlasmaWave
®
function ON/OFF without using the
humidication function of the unit.