Winix AW600 - Page 26

25
Care & Maintenance
Symptom
HumidiPür™ does
not turn on
Auto Mode is not
working
Vibrates or makes
noise
Power cord is hot
Power cord is plugged
in.
Low Water Indicator
light is on.
Water is lled inside
water tank.
Power cord is plugged
in.
Auto Mode Indicator
is on.
The unit is located on
an uneven surface.
Power cord is plugged
in.
Plug the power cord in.
Fill the water tank
Make sure the water
tank is in place and
lled correctly.
Unplug power cord
and plug it back in.
Push FUNCTION
button to select
Auto Mode.
Move to an even
surface.
Unplug the power
cord and contact
customer support.
Check If: Solution: