To Next PageTo Next PageWhat to do if my Winix WDH 871 does not turn on?
If your Winix Dehumidifier isn't powering on, ensure the power cord is securely plugged into a grounded 3-prong outlet. Also, empty the water bucket and re-install it properly. Check the float switch to ensure it moves freely and isn't blocked.
How to improve low airflow from my Winix Dehumidifier?
If you're experiencing low airflow from your Winix Dehumidifier, the filters and grills might be dirty. Clean the front grill and air filter to improve airflow.
Why is my Winix Dehumidifier running but not collecting water?
Your Winix Dehumidifier might be in defrost mode, where the fan runs but the compressor doesn't. It will automatically return to dehumidification. Also, during colder seasons, lower humidity levels can cause the unit to draw less water than in warmer seasons.
What to do if water isn't draining from my Winix Dehumidifier with a pump drain hose?
If water isn't draining through the pump drain hose of your Winix Dehumidifier, check the connecting hose for tangles or folds. Re-install the drain hose according to the manual and flatten the hose or remove any blockage. Also, ensure the pump is turned on and check if the pump display light is illuminated.
What to do if water isn't draining from my Winix WDH 871 Dehumidifier through a garden hose?
If water isn't draining through the garden hose of your Winix Dehumidifier, re-install it according to the manual. Also, flatten the hose or remove any blockage.
What to do if my Winix Dehumidifier does not work when pressing the power button?
First, ensure the power cord is securely plugged into a grounded 3-prong outlet. Then, empty the water bucket and reinstall it properly. Finally, check the float switch to make sure it is free from obstructions.
Why is my Winix WDH 871 Dehumidifier operating, but the dehumidification function isn't working?
Your Winix Dehumidifier might be in defrost mode. During this mode, the fan runs, but the compressor does not. The unit will automatically return to dehumidification when it's done.
What to do if water does not drain through the garden hose in my Winix WDH 871 Dehumidifier?
Check that the drain connector is securely installed. Refer to the manual for proper installation. Also, inspect the garden hose for any tangles, folds, or blockages and remove them.
Why is my Winix Dehumidifier making loud noise and/ or vibration during operation?
Move your Winix Dehumidifier to a level surface to reduce noise and vibration.
What to do if water does not drain through the pump drain hose in my Winix Dehumidifier?
Check the connecting hose for any tangles or folds, and remove any obstructions. Refer to the manual for proper re-installation of the drain hose. Also, ensure the pump is turned on and check if the pump display light appears.
General| Brand | Winix |
|---|---|
| Model | WDH 871 |
| Category | Dehumidifier |
| Language | English |
