SECTION 9 –
FURNITURE AND SOFTGOODS
9-4
6. Reverse steps to convert back into dinette
seating.
Extendable Dinette
-If Equipped
To Extend Dinette Table
1. Grasp the edges of the dinette table and pull all
the way out.
2. Insert dinette table extension (located in the
rear wardrobe).
Model 35P: The table extension is located
beneath a removable panel in the wardrobe
floor.
3. Align table extension pegs with table insert
holes and push edge of dinette table in to
adjoin with the table extension.
4. Release the catch on the table leg brace
(located on the bottom side of dinette table)
and lower table leg for support.
NOTE: Some models may feature an extra-wide
dinette table with two support legs to be
lowered.
To Next Page
Loading...
Need help?
General
