SECTION 9 –
FURNITURE AND SOFTGOODS
9-2
DINETTE/BED CONVERSION
(Model 23L)
(Typical View – Your coach may differ in
appearance)
Dinette and Table Extension
1. Pull release knob located on edge of dinette
table.
2. Rotate table extension until it “clicks” into
place.
Reverse steps to store table.
Dinette to Bed
1. Store table if extended.
2. Lift forward facing dinette seat cushion.
3. Press the Table Leg Release Button and fold
table leg UP until it “clicks” into locked (90-
degree) position.
4. Remove dinette table from the wall support by
lifting and pivoting the end of the table.
To Next Page