32
Call settings
1) SIM call settings
Call Waiting:
(1) Activate: When the call waiting function is turned on, the phone will
contact the network. After a while, the network will make a response,
and forward a message to corroborate your operation. After this function
is activated, if a third party is calling you during the conversation, the
network will give you a beep alarm, and display the telephone number of
the third party, too.
(2) Deactivate: If this function is turned off, the network will not give
you a beep alarm when any third party is calling you during your call
conversation.
(3) Query status: This function is used to inquire the network of the
current status that your phone is in.
Call Divert:
This network-based function allows an incoming call to be diverted to
another phone you designated.
(1) Diver all voice calls: When this function is set at “Activate”, all the
incoming calls will be diverted to the destination number. Select
“Activate” or “Deactivate”, the phone will contact the network; after a
short while, the network will make a response, and notify the operational
result.
(2) Diver if unreachable: When this function is set at “Activate”, and
your phone is unreachable, then all the incoming calls will be diverted to
a phone number you have designated. Select “Activate” or “Deactivate”,
the phone will contact the network; after a short break, the network will
make a response, and notify you of the operational results.
(3) Divert if no answer: When this function is set at “Activate”, if an
incoming call is not answered within the designated period, it will be
To Next Page