Do you have a question about the Winterhalter DuoMatik 3 and is the answer not in the manual?
Brand | Winterhalter |
---|---|
Model | DuoMatik 3 |
Category | Water Dispenser |
Language | English |
Explains symbols used in the instructions for clarity and safety.
Specifies the device's purpose for water softening in commercial warewashers and its limitations.
Highlights safety precautions for maintenance and repairs, emphasizing authorized technicians and original parts.
Provides crucial safety and operational advice for users to follow carefully.
Details the necessary conditions for the installation location, such as frost-free and near a water drain.
Outlines the steps for preparing the control head, including fitting adapters and securing them.
Emphasizes connecting the softener to water and waste networks according to local regulations.
Explains the mandatory use of a water safety device for compliance with DIN requirements.
Describes the process of installing a dirt trap to protect the system from particles.
Details how to connect the waste water hose and safety overflow to the drain.
Provides instructions for cleaning the softener's internal container, including salt refilling.
Details the procedure for removing and cleaning the dirt trap.
Outlines checks for the backflow preventer to ensure proper function and integrity.
Continued checks for the backflow preventer, ensuring correct installation and absence of leaks.
Verifies that the installation and connections match the operating instructions and diagrams.
Provides a table to convert water hardness measurements between different units.
Guides on determining total hardness and adjusting the brine valve accordingly.
Instructs on the correct type and method for adding regeneration salt to the softener.
Explains how to vent air and manually start the regeneration process.
Details how to set the softener's total hardness based on raw water analysis using a provided table.
Lists key points for instructing personnel on softener operation and maintenance.