Wintriss SmartPAC 2 - Instruction Sheet Manual

Instruction Sheet April 2020 1145200
Upgrading from Original SmartPAC or SmartPAC 2 to SmartPAC PRO Revision A 1
Wintriss Controls Group 978-268-2700 toll free 800-586-8324
Instruction Sheet – Upgrading from
Original SmartPAC or SmartPAC 2 to
SmartPAC PRO
This document shows you how to replace your existing original SmartPAC (SmartPAC 1) or
SmartPAC 2 with SmartPAC PRO.
Refer to your SmartPAC PRO Installation Manual (1143200), as needed.
Checking That Mounting Location Can Accommodate SmartPAC PRO ....................................... 1
Recording SmartPAC Initialization Settings Before Upgrading ..................................................... 2
Backing Up the Tools on Your Existing SmartPAC ........................................................................ 2
Using the SmartPAC 2 USB Disk BACKUP/RESTORE Installed Option to Back Up Tools ................... 3
Removing Your Existing SmartPAC ............................................................................................... 3
Mounting Your SmartPAC PRO ..................................................................................................... 4
Mounting Your Control Enclosure SmartPAC PRO ......................................................................................... 4
Mounting Your Panel Mount SmartPAC PRO .................................................................................................. 4
Terminating Cable Shields ............................................................................................................... 4
Wiring Your SmartPAC PRO .......................................................................................................... 4
Restoring (Copying) Tools to the SmartPAC PRO ......................................................................................... 12
Appendix A – Backing Up Tools Using SmartPAC Backup and Restore (SBR) ................................ 16
Installing SBR on Your Laptop ..................................................................................................... 17
Connecting Your Laptop to SmartPAC ......................................................................................... 18
Backing Up Tools .......................................................................................................................... 19
Responding to Errors That Interrupt Processing ............................................................................ 25
Responding to a Checksum Error .................................................................................................. 27
Checking That Mounting Location Can Accommodate
SmartPAC PRO
The SmartPAC PRO control enclosure and panel mount are larger than the control enclosure and
panel mount models of original SmartPAC and SmartPAC 2.
Before you start the process of upgrading to a SmartPAC PRO, make sure the mounting location has
enough space. See your SmartPAC PRO Installation Manual for the space required to install
SmartPAC PRO, either control enclosure or panel mount, including clearance required in front of or
behind the mounting surface:
• Control enclosure: 18 in. (457 mm) clearance required in front of the mounting surface
• Panel mount: 6 in. (152 mm) clearance required behind the mounting surface
NOTICE
If the existing installation location provides insufficient space, find another location for the
SmartPAC PRO. Follow the guidelines in your SmartPAC PRO Installation Manual.