feeling for more
08
feeling for more
07
(6) Pay attention to the direction of the water flow. (as shown below)
(7) Connect the water tank and pump with 6x9 silicone tube and fasten it with tie,
make sure the length of the water pipe is less than 1.5m ( as shown below )
1.5M
(8) Connect the 6x9 water pipe to the water outlet, tie the water pipe, make sure that
the discharge head is less than 6m and the length of the water pipe is less than
15m. ( as shown below )
15M
6M
Insert in alignment
with arrow direction
Locking
Alignment of locating slots
(9) P12C Drainage Pump has built-in alarm buzzer. When the pump fails and water
level reaches the alarm level, the buzzer will sound "om ... om".
(10) Connect the power cord, insert it in the direction of arrow on the power cord, and
then lock the nut. (P12C)
(5) The use of shockproof materials, ensure the water tank and condensate pump
stuck firmly, low vibration to avoid noise.
To Next Page
Loading...