U11
User Guide
I. Product Overview
1. Camera Lens
2. Microphone
3. Micro SD Card Slot
4. Blue Indicator Light
5. USB Port
6. Power/Camera/Video Recording Button
II. What’s in the Box
-1× USB Flash Drive Camera
-1× USB Cable
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
-1× Key Ring
III. Operation
>> Please make sure your USB flash drive camera is fully recharged before
using.
>> Please make sure the Micro SD card (4GB-32GB) has been formatted
already and is securely fitted into the camera’s SD card slot, or it will not work. A
SDHC Class 10 Micro SD card is recommended. If no Micro SD card is fitted into
the camera, the blue indicator light will be illuminated for 5 seconds and flash 3
times, then it will turn off. The camera will shut down automatically.
3.1. POWER ON/OFF
3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The
blue indicator light will flash once and stay illuminated, indicating the camera has
entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again.
The blue indicator light will flash twice and then turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any
operation more than 1 minute.
3.2. VIDEO RECORDING
3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The
blue indicator light will flash once and stay illuminated, indicating the camera has
entered into standby mode automatically.
3.2.2. Press the Video Recording Button once to record video. The blue indicator
light will keep flashing.
3.2.3. Press the Video Recording Button once again to stop recording video. The
blue indicator light will flash twice and then stay illuminated, indicating the
camera is back to standby mode.
[Note]:
1). A video file will be generated and saved every 10 minutes automatically.
2). The camera can record video for 1 hour continuously on a full charge.
3). Video Resolution: 720x480 Video Format: AVI
4). If the camera is in low battery, the indicator light will flash blue 6 times and
then turn off. The camera will shut down automatically and save all the video
files.
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. The
blue indicator light will flash once and stay illuminated, indicating the camera has
entered into standby mode automatically.
3.3.2. Press the Camera Button twice to take a photo. The blue indicator light will
flash once and then stay illuminated, indicating the camera is back to standby
mode.
IV. Video/Image Files Uploads
4.1. Power off the USB flash drive camera, and plug it into a proper PC computer
USB port directly.
4.2. Removable disk drive folder appears.
4.3. All the files can be accessed in the drive.
V. Setting Time/Date Stamp
5.1. Power off the USB flash drive camera, and plug it into a proper PC computer
USB port directly.
5.2. Removable disk drive folder appears.
5.3. Click on the drive in the root directory and inside the root directory, open the
txt file named “time.txt”. If you can’t find it, then create a txt file named “time.txt”.
5.4. Write the current date and time in the “time.txt” file with the correct format:
YYYY-MM-DD HH:MM:SS (For example: 2016-04-12 14:24:32). Save this file.
5.5. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the USB flash drive camera, and plug it into a proper PC computer
USB port directly.
6.2. The blue indicator light will keep flashing during the charging process.
6.3. It will take 2 hours to obtain a full charge.
6.4. The blue indicator light will stay illuminated when the USB flash drive
camera is fully recharged.
To Next Page
Need help?
General