p.33
To activate the lock you must:
Turn on your scooter by pressing the start button for approximately 3 seconds, you
will hear a beep and the display will be on.
2- Your scooter is on. To activate the lock code, quickly press the start button 7
times .
3- the default code is 00. To enter the numbers Use the brake to scroll the left digit
and the throttle trigger to scroll the right digit. Then validate by pressing the power
button twice in a row . To define your personalized password, change the code of
your scooter.
How to change the scooter code:
To change your code, unlock your scooter. Then press the start button 7 times .
Then type your active code (for the first change the active code is 00). To enter your
digits, use the brake to scroll to the left digit and the throttle trigger to scroll to the
right digit. Then validate (press the button twice in a row to validate).
You will be asked for a second entry to define a new code, once chosen, validate
(press the button twice in a row to validate).
To Next Page
