13 . Caring for
your Wisper Bike
Safety Check
Wisper offers you a safety check free of charge. This should be carried out within the first month or 300 miles,
which ever comes first. As part of this check the gears and brakes will be checked as they will have now worn in
and gear cables can stretch. Spokes will also be checked as again these will have bedded in and may be slightly
loose
Cleaning your Wisper Tailwind
You should make a habit of cleaning our Tailwind bike regularly. Especially if riding in extremely wet, dirty or salty
conditions (coastal areas or gritted roads during winter).
You should not clean your Tailwind with a standard pressure washer as this pressure of water can penetrate seals
and bearings. Instead clean your Tailwind with a soft water jet and/or a bucket of water with a sponge or brush.
Avoid unnecessarily soaking the display or areas around the battery compartment. After cleaning you should dry
the bike and lubricate the chain if necessary to prevent corrosion.
IMPORTANT Avoid getting any cleaning agents other than specific brake disc cleaner on the brake discs or pads
As with all bikes your Wisper Tailwind should be cared for and serviced regularly to ensure the safety and increase
the longevity of the bike.
To Next Page
Loading...
