What to do if my Wisper Bicycle power is on but the motor isn't working?
If your Wisper Bicycle has power but the motor isn't working, there are a few potential causes: * The battery may not be connected properly; try reinstalling it. * The battery fuse might be blown, in which case you should replace it. For other potential issues such as damaged motor connections or handlebar control problems, it is recommended to call service.
What to do if my Wisper Bicycle power is on but the motor is not working?
If your Wisper Bicycle powers on but the motor isn't working, it could be due to several reasons. First, check if the battery is properly connected and reinstall it if necessary. If the battery is fused, replace the fuse. If the motor connection is damaged or there's a problem with the handlebar control, you should call service.
Why is my Wisper 705se driving a shorter distance per recharge?
If your Wisper Bicycle isn't driving as far per recharge as it used to, consider these possible causes and solutions: * Check that your tyre pressure isn't too low. * Ensure the battery is fully charged and inspect the charger for faults, recharging completely if needed. * Consider using power assist and avoiding throttle-only operation, especially when hill climbing, making frequent stops, encountering strong headwinds, or overloading the bicycle. If the battery capacity is lost or damaged, consider replacing the battery.
Why is my Wisper 705se top speed too slow?
If your Wisper Bicycle isn't reaching its expected top speed, there are several potential causes. First, ensure the battery is fully charged. If the battery voltage is low, fully recharge it. If the problem persists, it could be due to a handlebar control issue or damage to the motor driveline, in which case you should call service.
How to improve driving distance per recharge on my Wisper 705se Bicycle?
If your Wisper Bicycle is driving a shorter distance per recharge than expected, several factors could be responsible. Firstly, ensure your tires are properly inflated by checking the pressures. Secondly, ensure that the battery is charged completely or have the charger inspected for faults. Thirdly, the battery itself may be damaged or losing capacity, requiring replacement. Finally, excessive hill climbing, frequent stops, strong headwinds, or overloading can reduce range; try using power assist and avoid relying solely on the throttle.
Initial setup and pre-ride checks before first use.
Regular checks to perform before each ride.
Guidelines for optimal battery maintenance and lifespan.
Detailed instructions for charging the bike's battery.
Information on the bike's water resistance and usage in wet conditions.
Procedures for general maintenance and adjustments.
Key technical data and performance capabilities of the bike.
Common problems and their troubleshooting steps.
How to operate and secure the battery.
Operation of power and light controls on handlebars.
Details on how to use the throttle control.
Explanation of pedal assist and assistance level adjustments.
How to use the throttle independently or with pedaling.
Information on brake types and their operation.
To Next Page
General