4
EN
FR
DE
SV
NL
FI
DA
IT
ES
CS
PL
PT
RO
HU
SK
ET
EL
IS
LV
LT
SL
TR
BG
HR
Warnings and safety notices
Types of measurements
- Use of the device can temporarily cause the loss of function of
equipment that is used simultaneously on the same limb.
- Do not use if you have a congenital cardiomyopathy, aorto-ve-
nous fistula, pulmonary pathology, a prosthetic heart valve, if you
are on kidney dialysis, or if you are hemodynamically unstable.
- There is a risk concerning Lead, PZT, DEHP, DBP, SCCP and D6
according to REACH regulation 1907/2006.
Withings BPM Core allows you to take two types of measure-
ments:
- Blood pressure and heart rate, which uses the cu as a sensor.
- ECG and Heart Sounds recording, which uses three electrodes
(two inside the cu, the other on the metal tube) and the stetho-
scope (the circular white sensor on the cu).
Before the measurement, make sure that you:
- Choose a calm, quiet room to take the measurement.
- Ensure you have a chair, one with a back, and a table or armrest
on which you can place your arm.
- Use the device on the left upper arm.
- Do not speak or move during the measurement.
- Wear only one layer of clothing, which should not cover your left
arm. The electrodes should be in contact with the skin.
Before the measurement
2 - Tighten the cu around
your arm. The stethoscope
should be facing the rib
cage, with the metal tube
facing down about one inch
above the elbow.
How to take measurements
1 - Sit down in a comfortable
position, legs uncrossed,
feet flat on the floor, arm
and back supported.
Uncover your left arm. Rest
for 5 minutes before the first
measurement.
1.
2.
To Next Page
Loading...
