Need help?Do you have a question about the Witschi ChronoProof PRO and is the answer not in the manual?
General| Test Medium | Air |
|---|---|
| Measurement Range | 0 to 10 bar |
| Resolution | 0.001 bar |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Measurement Type | Pressure Measurement |
| Operating Temperature | 10°C to 40°C |
| Humidity | Max. 80% (non-condensing) |
Details the necessary operating system and administrator rights for software installation.
Step-by-step instructions for installing the ChronoProof PRO setup software.
Guide on connecting the ChronoProof PRO to a PC and installing its drivers.
How to customize the header text for test tickets using the configuration tool.
Instructions for loading logos, saving, and sending personalized ticket designs to the device.
Overview of extra menu options, test program selection, and language settings.
Guidance on setting up test programs and defining specific test cycles with pressure parameters.
Explanation of the functions of buttons and symbols on the device's control and display panel.
Steps to switch on the device and open the test chamber for use.
Detailed procedure for preparing the watch and device before conducting a tightness test.
How to start the tightness test and monitor its progress during operation.
Information on how to understand and view the outcome of the tightness test.
Guide on printing the test results and configuring custom ticket formats.
To Next Page
